Ugreen 7-Port USB 3.0 Hub (CM481) Under Desk Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to hold the USB hub under the desk or secure it anywhere in place with 4 small wood screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Basic holder for Green USB-C to a 7-port USB A 3.0 hub, model no. CM481
Will keep it from moving around. Specifically made it for size #8, 3/4" screws, but any small screws will work. Files included are the complete pair and each ends separately. If your printer is good enough, you can print with no support. I used organic supports for the screw holes to make sure, 10-15% infill is all it needs. The hub is not heavy, so it does not need to be super strong. I used PLA for mine.
Hope you find it useful. Leave a comment on how it goes.