Counting matching models…
I was researching for a mount hand which can handle HyperX SoloCast Mic and found this attractive tablet/phone holder. Adapter which I create is not required any additional screws and nuts. You just replace part. Print instructions:…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Simple print made in Prusa Slicer. Only additional materials needed are memory foam and felt pads. memory foam should be 1cm (0.4") thick. Cut to 18cm x 26cm and place inside tray. Felt pads can be any size, I would suggest putting a few…
Print approx. €10.80–€13.20 excl. taxPreliminary estimate for PETGSource material: PET
Made a small 1x1 Gridfnity storage for my UGREEN FineTrack Smart Finder. Designed it so that i can find it the next time
I recently got a 2 Tb SSD and I got the Ugreen SSD Inclosure to put it in. I did not care too much for the rubber protective cover that goes over the aluminum inclosure. So, I made this one and printed it out of PETG-CF. Looks amazing in…
Mounting brackets for UGreen RevoDock Pro. I could not find any for this model so I made some. I used PLA which may work fine but the dock does get warm so I would advise using PETG or maybe even PA if you want to go overkill. Nothing…
This is a simple VESA mount holder for the UGREEN M.2 NVMe SSD enclosure. It allows you to securely mount the SSD case behind your monitor using the VESA screws, keeping your desk clean and your storage easily accessible. The enclosure…
A Vesa mount for the ugreen kvm switch. i wanted mine behind the monitor. This is compatible with VESA 100. The KVM needs to be thightened with velcro cable ties. In addition (as my monitor is already attached by vesa) i used a vesa multi…
Ugreen 100W 4 port power brick sucket support https://cad.onshape.com/documents/ef6935319325c4aa4372ca06/w/cf0829c898deaa24be5da600/e/dffeccbcd64b1b85687af1f4
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Made a small 1x1 Gridfnity storage for my UGREEN FineTrack Smart Finder. Designed it so that i can find it the next time
AYN Thor "PRO" Mount for UGREEN 6-in-1 USB-C Dock (Custom Fit Console-Style Stand) Turn your UGREEN 6-in-1 Dock into a specially designed docking mount for the AYN Thor PRO with this 3D printed attachment mount. It locks the dock into…
i printed this in petg upright with no supports 100 percent infilll
I made this to mount my Ugreen KVM AK500 in my 10 inch mini network rack. This was mounted in this rack https://www.printables.com/model/1173696-3d-printable-rack-10-inch-and-6-inch and works well. There is about 5mm of leeway for the KVM…
Model to mount the UGREEN GaN 5-in-1 65W desktop charger under the desk
I recently got a 2 Tb SSD and I got the Ugreen SSD Inclosure to put it in. I did not care too much for the rubber protective cover that goes over the aluminum inclosure. So, I made this one and printed it out of PETG-CF. Looks amazing in…
This Gridfinity 1×3 holder is specifically designed for the UGREEN Nexode Wireless Power Bank 10000 mAh (magnetic, USB-C 20 W) . It provides a clean, secure, and space-efficient storage solution within any Gridfinity system. The power…
A very simple under-desk mount for a UGREEN USB-C to DP adapter. I used a USB4 extension cable to bring it up to my laptop, and mounted this to my desk. I highly doubt anyone else wants to do something like this, but if you do, here it…
Mounting brackets for UGreen RevoDock Pro. I could not find any for this model so I made some. I used PLA which may work fine but the dock does get warm so I would advise using PETG or maybe even PA if you want to go overkill. Nothing…
This is a stand for a wireless charger from UGREEN. According to the website, the model is "Qi2-MPP 15w wireless charging pad", it's 10 mm thick and 60 mm wide. The hole in the back is to make it easier to remove. Supports are needed, 25%…
USB splitter UGREEN US216 desk mount. Although the model was designed for 25mm tables, mount bracket is not attached to the body, so the model can be imported into any program that supports the STL format and the height can be changed.
This is a simple VESA mount holder for the UGREEN M.2 NVMe SSD enclosure. It allows you to securely mount the SSD case behind your monitor using the VESA screws, keeping your desk clean and your storage easily accessible. The enclosure…
Allows for vertical and horizontal mounting. You will need 2 universal hooks i got them here: Printed using Bambu Translucent PETG. It is a pretty snug fit on the underside of the Switch. Didnt try to detach it as i was scared the tabs…
Onshape link available https://cad.onshape.com/documents/5b6d34ab117496b17e84080c
Underware mount for Ugreen usb switch https://eu.ugreen.com/products/ugreen-usb-2-0-switch-2-in-4-output-usb-kvm-switch?_pos=7&_sid=d7dcb4fc2&_ss=r In slicer mirror it along x axis
Designed for the “UGREEN SD Card Reader” (link below) so that it can be attached firmly to a desk, so that USB cables and SD/Micro SD cards can be removed without having to hold the device down. Also has an enlarged top area, where a…
https://www.instagram.com/reel/DAWUwaYuuJo/?igsh=MXJybW01eTY4d2pyaw== BOM: 4 * M3 x 10 self-tapping screw PLA, PETG or ABS filaments print with default setting of Bambulab A1 made for UGREEN 100W GaN Charger (not affiliate link)…
A number of simple accessories for the UGREEN KVM Switch (https://www.amazon.co.uk/dp/B0C8NFPSJV?ref=ppx_yo2ov_dt_b_fed_asin_title); Bracket A bracket to attach to the UGREEN KVM Switch , so that it can be attached to a monitor arm with…
Designed to fit Ugreen 9in1 5Gbps version, might fit other from the series (model CM498). Two versions of the bottom piece: - short one only protects dock - long one additionally protects sticking out MicroSD card so you can carry it…
I lost the shoes of my Ugreen Nexode RG charger, so I made new ones. And unlike the stock ones, they can be printed in fancy colors. Dimensional accuracy is important, so I'd recommend selecting the “External perimeters first” option of…
Hallo zusammen :) Ich habe hier für den UGREEN Magsafecharger eine Platte entworfen mit welcher man den Charger überall anbringen kann. Ich habe ihn in ABS gedruckt mit ein paar mehr Wandschichten und mehr Infill hinzugefügt, somit ist er…
This is a mount for the UGREEN 8K KVM Switch and the included remote. This is the switch I designed this mount for: https://www.amazon.de/UGREEN-Displayport-monitor-Tastatur-Festplatte/dp/B0CFFFHFJT The deviced are firmly clamped in place…
Hey! Just a little, very simple holder to store the remote control of your UGREEN USB-Hub underneath your desk. Keeps your desk clean. Printed in e-Sun ABS+. Moin! Mit diesem simplen Halter kann die kabelgebundene Fernbedienung für die…
Ugreen 100W 4 port power brick sucket support https://cad.onshape.com/documents/ef6935319325c4aa4372ca06/w/cf0829c898deaa24be5da600/e/dffeccbcd64b1b85687af1f4
Mount for UGREEN SKU 70774. Also called UGREEN 65W USB C PD Charger - 4 Ports. Used a extension cord to have it on the back of a night stand. For my use I printed it in 0.2 speed on my MK4 with PETG. Vertical shells perimeters set to 2…
Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100 . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like…
If you find my designs useful, please consider sending a tip ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like me, you're…
Hello A cover protection fot this usb charger UGREEN Nexode 4 Port GaN Fast Charger, such cover avoid to bend accidentaly the plug pins inside the backpack or travel bag. Regarsd Jonweb Print Settings Printer Brand: Creality Printer: K1…
A cover for the UGREEN Nexode charger. I have the 100W charger, but it will probably also fit the 65W and 45W versions as well (the 100W charger measures 50.5mm square). It may also fit the Uno range as well, but I don't have one of those…
Well, I needed a Mount for my bedside Ugreen charger. Since I upgraded to the 300W, I needed a solution. It is not perfect, but it works, so I'm happy. Please remix it and make it your own. it I printed it in Black Generic PLA on a Bambu…
A wall/desk mount for the Ugreen Nexode 65W 4-port USB charger based on the Ugreen Nexode 200W Wall/Desk Mount by dead1egs .
I designed this cooler for the UGreen 130W Car Charger because I wanted to be able to charge my power bank at full speed. It mounts around the charger without requiring any permanent changes. When stock, the charger overheats when…
A replacement latch for Ugreen 38-in-1 screwdriver set box (same part that you press to open the box). Requires supports and a brim.
Thanks to the Underware 2.0 Customizer, I have adapted the mount for an UGREEN Nexode 100W Desktop Charger.
UGREEN UNO 1K MagSafe Power Bank and Samsung T5/T7 SSD Gridfinity Module This 3D printable Gridfinity module is engineered to store and organize your UGREEN UNO 1K MagSafe power bank and a Samsung T5 or T7 SSD . Featuring precisely sized…
A fairly simple dock for the Ugreen Revodock 213 for the Secretlab Magnus (Pro) It's designed to repurpose the M5 Screws in the legs of the desk. I have a fairly long hex wrench, so I made the screw holes are open at the bottom of the…
Under desk mount for the Ugreen USB 3.0 switch used to switch between multiple computers using one set of peripherals. Slots in the side of the mount allow USB devices to plug into either side. The switch button has a rounded recessed…
Having started to have a good sort out of my office, i decided to start to use storage systems such as gridfinity and multiboard to organise all my stuff. I am in the process of sorting out draws and colour coding them with handles and…
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Elevate your workspace organization with this 3D Printed Gridfinity Bin , tailor-made to store the UGREEN CR127 SD/TF 3.0 Card Reader . Designed with precision and functionality in mind, this Gridfinity-compatible storage solution ensures…
Description The Smart Fortwo 450 is a compact and innovative car, but its round air vents make it impossible to use standard phone mounts designed for vent attachment. This project solves that problem by introducing a custom adapter that…
Resized the other one to fit the usb2.0 mount. My supports sucked so it came out only okay.
This mount is designed to mount the Ugreen USB Extension under your desk with two Screws. Link(Amazon.de): https://amzn.eu/d/eHrAEQi
I printed it with 30% infill so that the screw holes are a bit sturdier. Would probably work well with less since the mount is not exposed to a lot of stress/force. The bottom plate is a bit flimsy at 1mm thickness, but holds well and…
I have this fairly cheap and pretty decent “UGREEN 2-in-1 Qi2 Magnetic Foldable Charging Station” - but I use it on my nightstand and the led charge indicator is INSANE when using the airpod charger… It lights up the entire room at night.…
**It should be noted that as of publishing this remix, I have not fully tested the model to make sure #10 pan head wood screws fit properly in the mounting holes or not. If not, I will either update the model or the description…
UGREEN USB 3.0 4-Port Switch Underware holder compatible with Multiboard system. It was made by Underware 2.0 Customizer. Link: https://handsonkatie.com/underware-2-0-the-made-to-measure-collection/ Link to multiboard:…
Model to mount the UGREEN Nexode 65W desktop charger under the desk. Fitment is a little bit loose. Printed with some polymaker PLA, standard 0.2mm profile on a P1S. No supports needed! .f3d .3mf and .stl is available to download
Usefull when you have a short cable at your usb-hub but need it often at your computer. The adapter fits onto the Ikea Kallax-Desk. The parts fit into each other but you have to use superglue.
For my Macbook Pro M3, I bought a UGREEN 40 Gbps hard drive enclosure for an external M2 SSD. Since I travel a lot, I needed a simple mount to securely attach the SSD directly to the back of the screen. The rack I designed consists of one…
The lever on my UGREEN Magnetic Wireless Car Charger to tension the suction pad broke, so I designed a replacement. This initial design isn't very esthetically pleasing, but it works well, and makes a satisfying click when switched. Also…
This holder keeps a UGREEN Nexode X 65W charger (Euro Plug version) neatly tucked in the middle of a cable organizer. There are two slots to push the USB-C plugs through, so the cable keeps tidy without the need for an elastic band or…
Inspirując się uchwytem https://www.printables.com/model/137295-suitcaseboxcase-handle i potrzebą wymiany uchwytu w moim organizerze samochodowym Ugreen postanowiłem nieco dopasować projekt do moich potrzeb. Sam uchwyt pozostawiłem bez…
This is a 3D-printable TPU cover for the UGREEN Nexode Power Bank 25000mAh . The cover is designed to: Protect the power bank from scratches, minor drops, and daily wear. Maintain access to USB-C ports, power button, and LED indicators.…
USB Hub: https://www.amazon.ca/dp/B0CD1BHXPZ Uses four 6x2mm magnets Printed in PETG
A underdesk Mount for the Ugreen CM639 USB-C Dock. One side has a coutout for the Ethernet port, exept for that both sides are identical. I included the step files if you need to make modifications.
This is a little make i create to support my UGREEN USB 3.0 Card Reader SD 4in1 Stand for my personal need in first time. Print in 37 min with black BQ PLA. You can add after the print some bubble support like i've do it (see photos). If…
This is an under desk/table mount for the Ugreen CM806 USB 3.2 hub from Amazon. Designed so that when the backing plate is installed and screwed down there is no play when inserting removing USB drives etc. Though this will depend on…
I have multiple of the UGREEN M.2 cases for NVME SSD (512GB and 1TB) and needed a way to neatly keep it on my desk. I only cut the rackmount bit away and initially did a single holder, but then decided to add a dual holder option as well.
I’m not a pro at 3D printing; I just made a box for the Ugreen 300W and Meanwell 120W power supply. It should be compact in size for me and enough for daily use. (You should use the same glue to stick the Ugreen board to the top face.)…
A 10-inch, 2U rack mount for the Ugreen NASync DXP480T+ NAS. The all-flash NAS from Ugreen! My friend Maurício posted this on makerworld (ew) with my permission. Please don't report either of us! Follow and boost him so he can buy stuff.…
Another version for Ugreen 300W super compact size. I just made a box for the Ugreen 300W and Meanwell 120W power supply. It should be compact in size for me and enough for daily use. (You should use the same glue to stick the Ugreen…
Printing Instructions Filiment Print in a durable slightly flexable filiment like PETG though PLA may be good enough Slicing print vertically back to the build plate no supports required V1 or V2 the differnce bettween V1 and V2 is the…
Just a small stand to prevent it from moving all around and making it look good at the same time, nothing comples, just used the measurements for that usb-c hub since its the one that works with my macbook and was unable to find one…
I wanted to mount my ugreen usb switch in way, the status led is still visible. The desk has a thickness of 26mm, thinner desks work as well. The remote can be mounted with a bracked from another user, also available here, to the front of…
Made this model for https://eu.ugreen.com/products/25164, so that I can mount the USB switch under my desk along with the control switch. The main body's holder includes a gap for 2 sets of 20x10x3mm magnets, tightly fitted. The gap is…
For Ugreen KVM model CM664. It allow to fix the control under the desk with 4 screws.
This model is only for TPU. It is in the design for a tight fit and it requires a slight amount of flexibility with the model. The case is tight enough to hold by itself, but easy enough to remove when needed. There are 2 designs, smooth…
for usb cord https://www.amazon.fr/dp/B0C6LJSKV4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
A Simple Case to raise a Ugreen USB-Switch to allow routing cables underneath the device.
A basic mount for a 5-port Ugreen network switch. Tolerances are tight, so either press hard or print this at ~101%-103%. This is the switch I used: https://www.amazon.com/dp/B0D9JBTBZB?ref=ppx_yo2ov_dt_b_fed_asin_title
this is a UK plug cover that match the look of ugreen 100w charger
-A simple cable holder for the Ugreen Nexode 100W Power Bank (UGREEN Nexode Power Bank 12000mAh 100W) will certainly fit other models of these dimensions. - Some Anker power banks have similar / identical dimensions - power bank…
A simple mount to attach the socket of a UGREEN HDMI extension cable to a wall / unit / etc. In my case I designed it to mount my Amazon Fire TV Stick (with the case removed and heatsinks added) to get convection airflow behind my TV /…
Remixed to split for X1C and expand the sides to use the Ugreen 180 USB-C.
This is a Gridfinity compartment for the UGREEN 65W USB-C Charger (3 Ports) It is stackable and need 1x3x6u space. Shown Charger: UGREEN Nexode USB C Charger 65W GaN 3X USB-C-Port Included: STEP, FreeCAD (1.1 weekly) and STL Printed in…
Easy mount for external soundcard. 4 small screws needed.
Ich habe das ursprüngliche iPod-Case weiterentwickelt und dabei einige Änderungen vorgenommen, um es für meine Nutzung zu optimieren: MagSafe entfernt , um die Kompatibilität mit klassischen Zubehörteilen zu verbessern Der Hold-Schieber…
The original nut cracked, was not holding properly, this is also not perfect. The threads depth is not long enough, therefor it cannot be tightened so hard. This might be a good thing as i beleive it would cause it to break again or…
This is a wall mount for the UGREEN powered USB hub (Model No.: 50985, should also work with No.: 70336). There's space underneath to tuck away some extra cable.
What This is a compact box for the MagSafe-compatible NVMe SSD enclosure from Ugreen Compatible with Model 55151 : UGREEN Magnetic M.2 NVMe SSD Enclosure. Link to Amazon (Affiliate): https://amzn.to/4kyiW61 (thanks) Link to Amazon…
Camera cover for UGREEN camera (1080p/30fps model). It should simply friction fit. Just slide it in to the webcam. To print it, I would lay it down on its side and enable supports (organic). See third and fourth photo for reference. When…
The original model has been resized to fit an external enclosure for a 2.5” SSD Ugreen (UGREEN 2.5 Inch 6Gbps Type C Hard Drive Enclosure). Additionally, a divider has been added for convenient cable storage.
You are free to use this mount to keep the switcher under the table using screws or double side tape. Easy printing without supports. I did it with PLA, standard settings: 0.2 mm layer 2 walls
Have a UGREEN USB Hub / KVM switch and want to mount the control button somewhere? Here's a little case for doing that. It's sized to friction fit the button housing, and also has an M3 screw hole, although I've just mounted mine with…
recently got the ugreen hdmi switch and was surprised when no one else has made a mount for it, so in a few hours I roughly made what your seeing now, did make a few modifications over the time of doing it but should be a good result.…
I bought this MagSafe Car Mount from Amazon: 👉 https://www.amazon.de/dp/B0D2Q5M35Y The issue: The air vent in my car is slightly angled, so the mount sat crooked. I designed this angled adapter to fix that and keep the phone mount…
Intro 3D Parametric Model (OpenSCAD) of holder for UGREEN 40Gbps M.2 NVMe Enclosure and standard 40mm PC fan (stackable) Detailed model design description, as well as source code are hosted on GitHub Demo photos uploaded here are in two…
This is a dock/caddy I made to attach to the backside of my bedside table. This lifts up the charger off the ground, resulting in less USB cable length needed. It also has a frame with holes for the cables to slot through, resulting in…
![UGREEN Finder Pro Model [STP & STL]](https://media.printables.com/media/prints/450e6803-2978-40e0-943e-4a319bfe7345/images/12236617_6ed7e344-6256-4546-959c-8bd373fbc722_9984e6aa-67bd-46bd-ab8b-79093fcefe87/picture.jpg)
