XSR700 Fairing Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter kit that will allow you to mount a newer XSR900 fairing to a first gen XSR700.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Fairing for an XSR900 mounted to a first gen XSR700.
Amazon listing: https://www.amazon.com/Headlight-Windshield-2022-2025-Motorcycle-Windscreen/dp/B0G5YS6S37/ref=sr_1_4?sr=8-4
I recommend printing this in PETG or ASA. (I used ASA without any issues)
I would also add a brim and print at 100% infill. If you do not do a brim there is a good chance that part of the base will lift from the build plate while it is printing the turn signal extensions.
ALSO YOU MUST TAP THE TURN SIGNAL EXTENSIONS
I just used a traditional tap for metal with no issues. I believe mine were sized at M9 x 1.25 and then I used a jam nut to keep them in place. You can see from the photos I have added.
You also will need one more bolt that you currently have to keep the adjustment plate angled up.