XSR700 Fairing Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter kit that will allow you to mount a newer XSR900 fairing to a first gen XSR700.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Fairing for an XSR900 mounted to a first gen XSR700.
Amazon listing: https://www.amazon.com/Headlight-Windshield-2022-2025-Motorcycle-Windscreen/dp/B0G5YS6S37/ref=sr_1_4?sr=8-4
I recommend printing this in PETG or ASA. (I used ASA without any issues)
I would also add a brim and print at 100% infill. If you do not do a brim there is a good chance that part of the base will lift from the build plate while it is printing the turn signal extensions.
ALSO YOU MUST TAP THE TURN SIGNAL EXTENSIONS
I just used a traditional tap for metal with no issues. I believe mine were sized at M9 x 1.25 and then I used a jam nut to keep them in place. You can see from the photos I have added.
You also will need one more bolt that you currently have to keep the adjustment plate angled up.