Arch Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Special clamp for a special project
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 87
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
While building "Willis Modifications Support-Free LED Arch Lamp" (Printables Store), I needed a simple clamp to hold the parts together for gluing - finding nothing suitable - I designed this one!
The lamp I was building is available here: https://www.printables.com/model/1798745-support-free-led-arch-lamp-print-flat
I have two versions, the main difference is the opening is a little wider to make it easier to slide on.
I also have two different sized screw holes - 1 for M3 screws and 1 for M6 (I had some M6 screws and knurled nuts laying around - but the M3 will work fine!
See the pictures for how to use - assemble, clamp - then you can take the end off and apply glue - if you print two sets (6) you can clamp both ends at the same time.
I am sure you will find other uses for this clamp...just make it with some leftover PLA
Please enjoy! (and leave me a comment or a make if you can)