1 / 2
Craftsman 6” Belt Sander Dust Port Adapter (Model #32039596) — zdjęcie 1
1 / 2

Craftsman 6” Belt Sander Dust Port Adapter (Model #32039596)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dust collection adapter designed specifically for the Craftsman 6” Belt Sander

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Upgrade your shop setup and keep dust to a minimum with this custom-designed dust port adapter, built specifically for the Craftsman 6” Belt Sander (Model #32039596).

Engineered with a dedicated keying notch inside the coupler, this adapter locks securely into place on the tool end to prevent slipping under vibration. The interior features a smooth 0.25” transfer chamfer between section diameters to streamline airflow and reduce clogs.

While designed around Model #32039596, the precise dimensions may also make this a great universal fit for other benchtop sanders, portable power tools, or vacuum hoses.

Dimensions

  • Tool End (Coupler):

    • Outer Diameter (OD): 1.607”

    • Inner Diameter (ID): 1.381”

    • Coupler Length: 1.000”

    • Alignment Notch: 0.277” W x 0.034” D

  • Hose End:

    • Outer Diameter (OD): 1.436”

    • Inner Diameter (ID): 1.200”

    • Tube Length: 1.250”

  • Overall Specifications:

    • Total Length: 2.500” (Includes 0.25” smooth transition chamfer)

    • Wall Thickness: 0.236”

Print Settings & Recommendations

  • Material: PETG, ABS, or ASA (Highly recommended over PLA for workshop durability, layer adhesion, and impact resistance).

  • Perimeters / Wall Loops: 4+ walls (Crucial for functional workshop parts—extra walls add significantly more structural rigidity than high infill alone).

  • Infill: 20% or higher (Gyroid or Grid recommended for multi-axis strength).

  • Layer Height: 0.12mm to 0.20mm (0.20mm works great for functional prints; lower layer heights will yield smoother internal tapers).

  • Supports: None required if printed standing upright on the wider tool end.

Explore More Workshop Upgrades

Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:

Tagi