Ridgid Shop Vac Dust Separator Cart Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to make "John Builds It"'s ingenious design for mounting a 5-gallon dust separator above a Ridgid Shop Vac.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
These are printable parts to build https://www.youtube.com/@JohnBuildsIt ingenious space saving design for mounting dust collection above a shop vac. With this design, when using 1.5" PVC for the legs, you no longer need to by additional couplers, reducers, or 2" PVC. Just print the base, 1.5" table mount, and buy 1.5" PVC.
Prints great in super draft (0.28 mm) PLA without any supports. The 1.5" table mount is countersunk for #10 1/2" wood screws. Pressure fit should be sufficient for the PVC pipe.
I confirmed fitment using a Ridgid HD1200 Shop Vac.
Here's John's original design:
Here's CyberBob's upgraded version with other cool 3D printable attachments.
5-Gallon Dust Separator Options:
Oneida Air Systems Dust Deputy Low-Pro: https://www.oneida-air.com/dust-deputy/wet-dry-vacuum-kits/dust-deputy-low-pro-lid-separator-plus-kit