Deity V-Mic D3 Pro External Battery Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External battery mount / holder for a Deity V-Mic D3 Pro microphone
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Deity V-Mic D3 Pro is a small shotgun mic used for video production. It has an internal 3.7v 320mAh lithium-ion battery which provides around 50 hours of runtime. Unfortunately, the battery is non-user replaceable and is prone to discharging below safe limits if left unattended without regular charges. Once the battery discharges below around 2.5v it will become irreparably damaged and will no longer hold a charge.
This is what happened to my D3 Pro. I left it in a drawer for too long. Rather than throw away my D3 or send the D3 to Deity for repair, I repaired it myself. Since the battery protection circuits in the D3 don't cover discharges, and I didn't want to keep replacing the battery, I replaced the old internal battery with a lead to an external LiPo battery with under and over charge circuitry.
The case for the external battery just fits under the mic and attaches to the D3's shock mount with 6mm M3 screws.
The mounting plate is best printed on its side and requires supports. I printed my parts in yellow PLA+.
To assemble, once all parts are printed:
Attach Mounting Plate to the D3's shock mount.
Slide the Holder Body on the Mounting Plate. It has 3 detents. I set mine in the middle detent.
Place your battery in the Body, guiding the connection wires to the back.
Slide the Holder Lid on the Body, allowing the battery wires to go through the small notch in the Lid's end.
Here are the additional parts needed:
2 X 6mm M3 screws to attach mounting plate to D3 shock mount.
1 X 501646 LiPo battery 350-380mAh (Dimensions: 5mm X 16mm X 46mm). A bigger battery won't fit in the case along with the necessary wires.