Clip on ZWB2 UV Filter for Wuben X5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attachment for the Wuben X5 which adds a ZWB2 filter in front of the UV led.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is an attachment for the Wuben X5 which adds a ZWB2 filter in front of the UV led to reduce visible light interference for better fluorescence. It uses a cheap and widely available filter for the Convoy T2/T3. This attachment can be easily removed and reinstalled when needed. The white light and the laser are usable with this attachment installed.
Filter/No filter Comparison:

It's more pronounced on camera, but there is still an improvement in person.
Parts needed:
18mm diameter, 1.5mm thick ZWB2 filter (the one used on the Convoy T2/T3)
I bought this (ships from US): https://www.gadgetconnections.com/products/convoy-t3-or-t2-zwb2-filter-for-uva-365nm-light
Convoy (ships from china): https://convoylight.com/products/zwb2-filter-for-uva-365nm?variant_sku_code=10986298-10263757-47813494-0-0-0-0
Superglue to secure bezel
Print settings:
0.2mm layer height
0.4mm nozzle
PLA works fine, but PETG might be preferable for longer use and hot environments.
No supports
Assembly:
Place filter in its cutout.
Apply superglue to the raised part of the bezel.
Carefully install the bezel into the base, avoiding getting superglue onto the filter.
Usage:
Slip on one side first and then push the other side into place. Otherwise the flexible section might snap.
