Clip on ZWB2 UV Filter for Wuben X5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an attachment for the Wuben X5 which adds a ZWB2 filter in front of the UV led.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is an attachment for the Wuben X5 which adds a ZWB2 filter in front of the UV led to reduce visible light interference for better fluorescence. It uses a cheap and widely available filter for the Convoy T2/T3. This attachment can be easily removed and reinstalled when needed. The white light and the laser are usable with this attachment installed.
Filter/No filter Comparison:

It's more pronounced on camera, but there is still an improvement in person.
Parts needed:
18mm diameter, 1.5mm thick ZWB2 filter (the one used on the Convoy T2/T3)
I bought this (ships from US): https://www.gadgetconnections.com/products/convoy-t3-or-t2-zwb2-filter-for-uva-365nm-light
Convoy (ships from china): https://convoylight.com/products/zwb2-filter-for-uva-365nm?variant_sku_code=10986298-10263757-47813494-0-0-0-0
Superglue to secure bezel
Print settings:
0.2mm layer height
0.4mm nozzle
PLA works fine, but PETG might be preferable for longer use and hot environments.
No supports
Assembly:
Place filter in its cutout.
Apply superglue to the raised part of the bezel.
Carefully install the bezel into the base, avoiding getting superglue onto the filter.
Usage:
Slip on one side first and then push the other side into place. Otherwise the flexible section might snap.
