Big Walk Buoy Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The buoy lamp from Big Walk, ready for 3D printing with multiple light options.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 1090
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- GNU General Public License v3.0
A faithful recreation of the buoy lamps from Big Walk, including the pedestal you find them on.
At 100% scale, the buoy is 100mm in diameter, and stands just over 150mm tall with the pedestal base.
Includes 3 configurations:
Enclosed - Solid buoy and pedestal for no internal lights
ESP32C3 - Pedestal has a slot for an ESP32 C3 Super-Mini (18x23mm) with a USB-C port and a mount for a 37mm 12 LED WS2812b ring, designed to be used with WLED
LED_Puck - Pedestal has a mount for the common LED puck compatible with Bambu Lab MH001 light projects, and a pass-through for the USB cable. These are readily available in solid white and RGB.
---
You'll need to print the lid (same for all models), a buoy (hollow for lamp, solid for no lights), and the correct pedestal. Split into three parts for easy printing without multi-material capabilities. The hollow buoy only needs supports on the inside for a clean print.
Mine is printed with basic cheap PLA. Matte black for the lid, an orange-red for the buoy, and a matte grey for the pedestal. The hollow buoy is designed to print with 3 walls at 0.48mm (with a 0.4mm nozzle), if your slicer tries to transition to just 2 walls for part of the print you will likely see that once the light is on. Adjust your wall settings to make sure it prints with a consistent number of walls all the way up.
3mf and f3d files for all 3 are included, in case you want to adapt to your own light device!