Big Walk Buoy Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The buoy lamp from Big Walk, ready for 3D printing with multiple light options.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 179
- Makes
- 1
- Views
- 1,090
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- GNU General Public License v3.0
A faithful recreation of the buoy lamps from Big Walk, including the pedestal you find them on.
At 100% scale, the buoy is 100mm in diameter, and stands just over 150mm tall with the pedestal base.
Includes 3 configurations:
Enclosed - Solid buoy and pedestal for no internal lights
ESP32C3 - Pedestal has a slot for an ESP32 C3 Super-Mini (18x23mm) with a USB-C port and a mount for a 37mm 12 LED WS2812b ring, designed to be used with WLED
LED_Puck - Pedestal has a mount for the common LED puck compatible with Bambu Lab MH001 light projects, and a pass-through for the USB cable. These are readily available in solid white and RGB.
---
You'll need to print the lid (same for all models), a buoy (hollow for lamp, solid for no lights), and the correct pedestal. Split into three parts for easy printing without multi-material capabilities. The hollow buoy only needs supports on the inside for a clean print.
Mine is printed with basic cheap PLA. Matte black for the lid, an orange-red for the buoy, and a matte grey for the pedestal. The hollow buoy is designed to print with 3 walls at 0.48mm (with a 0.4mm nozzle), if your slicer tries to transition to just 2 walls for part of the print you will likely see that once the light is on. Adjust your wall settings to make sure it prints with a consistent number of walls all the way up.
3mf and f3d files for all 3 are included, in case you want to adapt to your own light device!