Nissan Skyline GT-R R34 V-Spec II – Moving Wheels – 1:18, 1:24 & 1:64
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable R34 V-Spec II in three scales, with separate rims, tires and screw-mounted moving wheels.
- Ocena
- 0 / 5
- Polubienia
- 66
- Pobrania
- 233
- Wydruki
- 0
- Wyświetlenia
- 1466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
The Nissan Skyline GT-R R34 V-Spec II is one of the most recognizable Japanese performance cars ever created. This printable interpretation was developed with a strong focus on its iconic proportions, squared body shape, distinctive front end, four round taillights, rear spoiler and classic six-spoke wheels.
The model was designed primarily for FDM printing. It has no interior or opening body panels, allowing the body and closed underbody to form one strong, printable part. The wheels remain fully functional and rotate on metal screws.
Perfect for:
fans of Japanese and JDM cars;
collectors of printable scale vehicles;
automotive display models;
painting and customization projects;
anyone looking for a printable car with functional moving wheels.
Model features:
recognizable R34 V-Spec II body proportions;
body and closed underbody combined into one solid part;
separate rims and tires;
functional moving wheels;
screw-mounted wheel system;
closed doors, bonnet and trunk;
no interior;
corrected wheel position and width;
reinforced and print-friendly rear spoiler;
simplified visible exhaust tip;
preserved rear diffuser silhouette;
no supports required inside the body.
Available scales:
1:18 – uses M3 screws;
1:24 – uses M2 screws;
1:64 – uses M1.6 low-head screws.
For the best wheel movement, use screws with a smooth, unthreaded section directly below the head. The threaded section should secure the wheel without pressing it tightly against the body.
What’s included in each scale:
1× body with integrated closed underbody;
1× rim STL – print four copies;
1× tire STL – print four copies.
Important – tap the Body before installing the wheels
Before installing the wheels, the wheel mounting holes in the Body must be tapped using the correct tap for the selected scale:
1:18 scale – M3
1:24 scale – M2
1:64 scale – M1.6
Do not drive the screws directly into the untapped Body, as this may damage or crack the print. For the best control, cut the threads slowly by hand and keep the tap aligned with the wheel mounting hole.
After tapping, install the wheels and tighten the screws only enough to hold them in place while allowing them to rotate freely.
Metal screws and taps are not included.
Printing recommendation:
Technology: FDM recommended;
Body orientation: closed underbody placed on the build plate;
Rims and tires: print separately;
Body and rims: PLA or PETG;
Tires: TPU 85A is strongly recommended for soft, flexible and more realistic tires. The flexible material also makes it easier to fit the tires onto the separate rims;
Supports: organic supports are recommended mainly underneath the rear spoiler;
Layer height: 0.10–0.20 mm depending on scale and desired detail;
Nozzle: tested and prepared with a 0.4 mm nozzle in mind;
Fit: test one rim and tire before printing the complete wheel set.
TPU 85A is a very soft material, so print the tires slowly and use a filament path suitable for flexible materials. A firmer TPU can be used if your printer cannot reliably handle 85A, but TPU 85A provides the preferred result.
The 1:18 version has been successfully test printed and assembled. The 1:24 and 1:64 versions were adapted separately with scale-appropriate wheel mounts, clearances and reinforced small details.
Share your print!
If you print this model, please upload a Make with photos of your finished car. Your photos help verify different materials, slicer settings and color combinations—and they also help other makers with their own prints.
Comments, assembly feedback and suggestions are very welcome.
What’s next?
The next car joining the collection will be the:
BMW M3 E46 Coupé – stock version
What car should be created after the BMW? Leave your suggestion in the comments. The most interesting and popular ideas will be considered for future models.