rc mowing trailer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
no one has made this so i spent days designing this trailer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU Lesser General Public License
no one has made this so i spent days designing this trailer you need no supports except for the wheels. it is not perfect
you will need glue that works good with plastic, 2 bearings that is 4mm wide 10mm inside 15mm outsid for the motor i just used a no name cheap brushless motor and esc +servo tester to control speed and i used 2mm trimmer wire but you could probably get away with using your filament maybe tpu
i am not the best at designing so please post your make if you managed to make it and comment if you know ways to improve my design.
i printed everything with 70% gyroid infill
note the wheels are not mine and are made by doggy.prints