Skoda Citigo Navigon to MagSafe Phone Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,49 € – 0,60 € netto (bez VAT)
Dla pliku: navigonToPhoneAdapter_0.4n_0.2mm_ASA_COREONE_15m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,54 € netto (środek widełek).
- Masa podana przez autora
- 6 g
- Czas druku podany przez autora
- 15,6 min
- Materiał u źródła
- ASA
- Materiał wyceny
- ASA
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Adapts the old Navigon screen mount to a MagSafe compatible phone mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
Škoda Citigo Navigon → MagSafe Phone Mount Adapter
Give the original Škoda Citigo Navigon mount a new lease of life with this simple and quick MagSafe adapter.
This adapter is designed to fit the original Navigon mounting point in the Škoda Citigo and other similar models and convert it into a convenient MagSafe-compatible phone mount. It lets you reuse the factory mount location rather than installing a completely new phone holder.
Features
Designed for the Škoda Citigo Navigon mount
Converts the original mount to a MagSafe phone holder
Keeps the phone securely positioned in the original dashboard location
Compact, clean design
Prints in around 15 minutes!
No modification to the car's dashboard required
Ideal for iPhone and other MagSafe-compatible phones/accessories
Printing
The model is designed with 3D printing in mind and can be printed using standard FDM printers.
Recommended settings:
Material: ASA/Other high temp resistant material
Layer height: 0.2 mm
Supports: Not required
Infill: ~15%
Walls/perimeters: 2 or more
I recommend using a reasonably strong material because the part will be exposed to vibration and temperature changes inside the car. Do NOT use PLA.
Parts List
MagSafe ring: I used a magsafe wall mount Link (see drawing for dimension of sticking surface) this one comes with a strong double sided tape that worked well for me.
Optional: CA Glue/Strong adhesive for added piece of mind.
Installation
Print the adapter.
Attach your MagSafe mount/magnet to the adapter.
Clip/install the adapter into the original Navigon mounting point (may be tight the first few times).
Attach your phone and enjoy the new mount.
Note: It is a tight fit by design so it does not wobble around
If you print this model, I'd love to see your make! Please upload photos and share any improvements or suggestions.