Edifier MR4 shelf for IKEA Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Edifier MR4 shelf for IKEA Skadis
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Couldn't find any good shelves for my speakers, so decided to design my own. To mount it to the Skadis itself you will need 10 clips in total, you can grab them here: https://www.printables.com/model/1215997-low-profile-t-clip-for-ikea-skadis/files
Also, to prevent Skadis from bending print 4 of these: https://makerworld.com/en/models/47432-ikea-skadis-spacer and put them behind bottom corners of your shelves.
Speaking about printing materials, I highly recommend using PETG, but PLA should also work. The only issue I had with PLA on my previous iterations is that it bends with summer heat, so be careful, you don't want speaker to fall down at night.
Happy printing! Don't forget to publish your results and give me feedback!