Shady Lady Boardgame Box Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box Extender for Shady Lady to prevent box lift after sleeving cards
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple box extender for the Shady Lady boardgame.
Printed in 0.24, but it is a simple model that should be able to get printed at even higher layer height.
If you want to keep the original divider, you will need to trim ~3mm off the long side.
Depending on your box, the lid might be a bit loose, you can make cardstock shims and attach it to the lid to make it tighter.
When inserting, do it slowly and as parallel as possible, inching the corners/sides down evenly or it won't go in right
_Short version is 1 cm shorter than the original. If used, you will have to carefully arrange all the chips to be as short as possible before closing the lid
The original is for lazy people like me that just wants to throw the whole bag in.