1 / 4
Apertura Carbonstar 200 front and rear covers — zdjęcie 1
1 / 4

Apertura Carbonstar 200 front and rear covers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are the aperture (dust) cover, the rear mirror cell cover, and a threaded plug for the rear mirror cell cover.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I realized after first light with my Carbonstar 200 that the covers needed to be replaced. My designs were done on Autodesk Fusion 360. The prints were made with a Bambu Labs X1C printer using black Polymaker ASA thermoplastic. The fit is snug...let the prints cool before trying to use them.  The Fusion 3d design files are included.

The dust cover fits the front of the scope even if you have the Apertura 2ndary mirror thumb screws installed. It works for buth the scope and the dew shield. The mirror cover incorporates a 40mm threaded plug in the center for aiding in collimation (as seen from the back) and easy mirror temperature equilibration. Basically, you don't have to take the cover off unless you just want to. The rear collimation screws are clear of the cover. The fit is tabbed around 4 equally spaced locations. The inside flange is loose and is only there to presvent light leaks.