1 / 4
Apertura Carbonstar 200 front and rear covers — image 1
1 / 4

Apertura Carbonstar 200 front and rear covers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are the aperture (dust) cover, the rear mirror cell cover, and a threaded plug for the rear mirror cell cover.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I realized after first light with my Carbonstar 200 that the covers needed to be replaced. My designs were done on Autodesk Fusion 360. The prints were made with a Bambu Labs X1C printer using black Polymaker ASA thermoplastic. The fit is snug...let the prints cool before trying to use them.  The Fusion 3d design files are included.

The dust cover fits the front of the scope even if you have the Apertura 2ndary mirror thumb screws installed. It works for buth the scope and the dew shield. The mirror cover incorporates a 40mm threaded plug in the center for aiding in collimation (as seen from the back) and easy mirror temperature equilibration. Basically, you don't have to take the cover off unless you just want to. The rear collimation screws are clear of the cover. The fit is tabbed around 4 equally spaced locations. The inside flange is loose and is only there to presvent light leaks.