Airsoft Range Target | Printable Bullseye STL + A4 PNG | No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanging bullseye as a 3D print, plus an A4 PNG to print on paper and staple to cardboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Two ways to use it:
1. Print the STL. It is a 170 mm bullseye with a hanging loop, 3 mm thick,
no supports. Hang it as a close-range practice target or as wall art in
the gear room.
2. Print the PNG on A4 at 100% (no scaling) and staple it to cardboard.
Same ring layout as the STL. Original design — not a licensed IPSC, IDPA
or NRA face.
PRINTING THE STL
- No supports. Prints flat on the bed.
- 0.2 mm layers, 100% infill, Arachne walls.
- Olive, tan or black PLA.
PRINTING THE PNG
- A4, 100%, actual size.
- Any laser or inkjet. Cardboard backing.
FILES
- 05-range-target.stl
- 05-range-target-A4.png
- SVG and DXF of the same outline