1 / 2
Airsoft Range Target | Printable Bullseye STL + A4 PNG | No Supports — image 1
1 / 2

Airsoft Range Target | Printable Bullseye STL + A4 PNG | No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hanging bullseye as a 3D print, plus an A4 PNG to print on paper and staple to cardboard.

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution

Two ways to use it:

1. Print the STL. It is a 170 mm bullseye with a hanging loop, 3 mm thick,
no supports. Hang it as a close-range practice target or as wall art in
the gear room.
2. Print the PNG on A4 at 100% (no scaling) and staple it to cardboard.
Same ring layout as the STL. Original design — not a licensed IPSC, IDPA
or NRA face.

PRINTING THE STL

- No supports. Prints flat on the bed.
- 0.2 mm layers, 100% infill, Arachne walls.
- Olive, tan or black PLA.

PRINTING THE PNG

- A4, 100%, actual size.
- Any laser or inkjet. Cardboard backing.

FILES

- 05-range-target.stl
- 05-range-target-A4.png
- SVG and DXF of the same outline

Tags