Beatbot iSkim 2026 – Anti-Stuck Bumper Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti-stuck bumper legs for Beatbot iSkim 2026 — bolts on, no mods needed
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Beatbot iSkim 2026 kept getting stuck on a shallow step in my pool, so I designed extended bumper/legs that attach onto the robot's existing legs to add clearance and stop it from beaching itself. No modification to the iSkim required.
Details:
Two halves bolt together to each other (not into the iSkim itself) using M3 bolts (M3x12) and matching M3 nuts
Designed with M3 mounting holes to match the bolt pattern
Split into two halves for easier printing — sliced/cut using PrusaSlicer's built-in cut tool
Once assembled, the piece fits onto the existing iSkim legs — no drilling, cutting, or altering the robot needed
Print settings:
Printed on a Prusa Core One
Printed in PETG, 50% infill (bumpers take repeated impacts against pool walls/steps)
Normal supports required
2+ perimeters recommended for durability
PETG chosen as that's what I had available — will update this listing with long-term results since these will be submerged 24/7
Assembly:
Print both halves
Pre-thread the M3x12 bolts into each half (like pre-assembling)
Position both halves onto the iSkim's existing legs, then finish tightening the bolts into the nuts to join the halves together directly on the unit
Completely fixed my beaching problem — will report back on how they hold up to constant water exposure. Hope it helps anyone else running into the same issue!