1 / 4
Beatbot iSkim 2026 – Anti-Stuck Bumper Legs — image 1
1 / 4

Beatbot iSkim 2026 – Anti-Stuck Bumper Legs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Anti-stuck bumper legs for Beatbot iSkim 2026 — bolts on, no mods needed

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
31
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

My Beatbot iSkim 2026 kept getting stuck on a shallow step in my pool, so I designed extended bumper/legs that attach onto the robot's existing legs to add clearance and stop it from beaching itself. No modification to the iSkim required.

Details:

  • Two halves bolt together to each other (not into the iSkim itself) using M3 bolts (M3x12) and matching M3 nuts

  • Designed with M3 mounting holes to match the bolt pattern

  • Split into two halves for easier printing — sliced/cut using PrusaSlicer's built-in cut tool

  • Once assembled, the piece fits onto the existing iSkim legs — no drilling, cutting, or altering the robot needed

Print settings:

  • Printed on a Prusa Core One

  • Printed in PETG, 50% infill (bumpers take repeated impacts against pool walls/steps)

  • Normal supports required

  • 2+ perimeters recommended for durability

  • PETG chosen as that's what I had available — will update this listing with long-term results since these will be submerged 24/7

Assembly:

  1. Print both halves

  2. Pre-thread the M3x12 bolts into each half (like pre-assembling)

  3. Position both halves onto the iSkim's existing legs, then finish tightening the bolts into the nuts to join the halves together directly on the unit

Completely fixed my beaching problem — will report back on how they hold up to constant water exposure. Hope it helps anyone else running into the same issue!

Tags