1 / 1
Stand for APC Smart-UPS SMT1500C or any Tower PC 172mm Wide or Thinner (No Supports) — zdjęcie 1

Stand for APC Smart-UPS SMT1500C or any Tower PC 172mm Wide or Thinner (No Supports)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified the model to be able to hold my new APC Smart-UPS Battery Backup

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I printed mine with Creality Black Hyper-PLA with a Creality K1 Max using a 0.4 nozzle and Smooth PEI plate at 15% infill using the default settings without a brim. I dicovered just after starting the print knowing that I would run out of filament during the print, that I didn't have another roll of the filament, so I immediately ordered two rolls from Amazon, paying an extra $4.99 for delivery within 3 hours or less.  It arrived about 20 minutes after I ran out of filament, only slightly delaying my completion time.

I would upload my .gcode file, but I get an error when I try.