1 / 1
Stand for APC Smart-UPS SMT1500C or any Tower PC 172mm Wide or Thinner (No Supports) — image 1

Stand for APC Smart-UPS SMT1500C or any Tower PC 172mm Wide or Thinner (No Supports)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified the model to be able to hold my new APC Smart-UPS Battery Backup

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

I printed mine with Creality Black Hyper-PLA with a Creality K1 Max using a 0.4 nozzle and Smooth PEI plate at 15% infill using the default settings without a brim. I dicovered just after starting the print knowing that I would run out of filament during the print, that I didn't have another roll of the filament, so I immediately ordered two rolls from Amazon, paying an extra $4.99 for delivery within 3 hours or less.  It arrived about 20 minutes after I ran out of filament, only slightly delaying my completion time.

I would upload my .gcode file, but I get an error when I try.