Yet Another Mechanical Arm Mounting System (YAMAMS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For all the versions you can find on this site, this one is surely different.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Introduction
I mostly designed this system to mount different things in my workroom. That being mostly a mic and Raspberry Pi 500+ with monitor. I will post more iterations as I add to this system; still need to mount the RPi 500+ with Raspberry Pi Monitor.
What To Do?
There are currently three different parts to use:
A locking linkage: for more defined mechanical arm positions.
A sliding linkage: for a not so defined mechanical arm position.
A combined linkage: for transitioning between the two other linkages.
Each come in three lengths along with some mounting hardware and accessories.
Hardware:
Current bolts and nuts are listed below:
8mm bolts and nut - for joint connections.
5mm socket and nut for post mounting print.
1/4-20 for mic mounting bolt.
Work in Progress
The next major update is a 90-degree orientated version for each joining linkage.
Additionally, I plan on creating a rail system to go above my work surface to better position my overhead light during build sessions.
Ideas!
if you have an additions you would like me to add, please let me know.