Solar Panel Frame - 118mm x 173mm Mesh Node
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame for a 10W 5V solar panel from Ali Express to be used for a Meshcore solar node; for both a car rooftop and pole.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A frame for the following 10W 5V solar panel from Ali Express to be used for, in my case, a Meshcore solar node. This could be used as a roof top repeater/node, or adapted for use with a car roof/mobile solar node.
The dimensions of my solar panel are: 173mm x 118mm x 12mm (including thickness for cable housing which sits partially into the frame)
or 6 13/16" x 4 5/8" x 1/2"
The holes will accept 20mm magnets.
I plan on editing one of the existing car roof nodes circling the web to accept this panel in some way.
Printed in ASA
Planned for the future:
Model accepting 40mm magnets
Car roof housing integration for a rooftop RAK mobile node and/or Heltec V3/V4 node.
Easier way to attach the panel frame to a rooftop/pole repeater/enclosure.