A strongbox for a portable Harddisk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For transporting or safe storage of that harddisk with those file. You know the ones. Can't loose those. Must keep safe!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For storing a harddisk with a lot of historical data, the original packaging falling apart, I created this strongbox.
It was designed with padding-foam in mind!. I don't have access to fancy filaments that foam up when printing, so I just designed around 10mm foam. (Not realising the foam I had was either 7 or 16mm ...)
But with some shaving of the foam, it fits nicely.
Funny enough I'm most proud of the cable retainer. It's a very simple thing, just an L shape that's pushed into a slot. With much care and force, I might have to add! The retainers have 0.2 clearance either direction, if this is too precise for your printer, then rescale them down a touch. I wouldn't dream of printing this on my Ender3, but the XL is pretty dialed in. Still had to carefully put a large portion of my body weight on it to get it to slide in.
Inspiration attribution; Strongbox created with my own recreation of a strongbox model I found online, and later found a parametric version of said box. This project was created in Fusion 360 and at the time, I did not have access to it. So I recreated it in FreeCAD. My FreeCAD project is no longer listed as the original parametric files are easier to work with once you have Fusion running. Go check it out; https://www.printables.com/model/577125-rugged-box-with-handle-1-file-and-all-parametric .