Ender 3 V2/Pro bed carriage for MGN12C/MGN12H linear rails and 9mm belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed carriage (bracket between the bed carrier and the MGN12 linear rail carriages) for Ender 3 V2/Pro and 9mm belt
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
There are several similar projects out there, this one is optimised for stiffness while still being relatively light. Made specifically for 9mm belts since the stock ender bed carrier only accepts 6mm belts. You don't have to use the belt clamp provided with this project, but I think the belt loop is a rather neat solution.
Needs four M5 screws - M5x10 or so - and four M5 nuts. Only the MGN12C version is tested, but MGN12H version should work fine.
Fully open source, although the fusion file probably is quite ugly since I only have been working with 3D CAD for a month or so.