Elegoo Centauri Carbon 2 Magnetic Exhaust Vent to 4 1/2" Flexible Exhaust Duct Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print will adapt from Elegoo Centauri Carbon 2 exhaust vent to a 4 1/2" standard flexible dryer exhaust duct hose.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This print will adapt from Elegoo Centauri Carbon 2 exhaust vent to a 4 1/2" standard flexible dryer exhaust duct hose.
I used 10x3mm magnets, 2 in each hole for 8 total, and it's holding on strong! The holes are sized for friction fit, no glue needed!
I made this because the other options available either weren't magnetic or wouldn't fit inside the spare 4 1/2" dryer duct I had lying around. Hopefully this helps you make use of some dryer duct you also have lying around!
I'll be uploading a modular window adapter too, be on the lookout!