Wuben E7 18650 Extension Tube - Screw the 10€ Aluminum Pipe Monopoly!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Let’s be honest for a second: 10 euros for a tiny, hollow piece of aluminum? Are you kidding me, Wuben?The Wuben E7 is…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 51
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Let’s be honest for a second: 10 euros for a tiny, hollow piece of aluminum? Are you kidding me, Wuben?
The Wuben E7 is an awesome little flashlight, but selling it with a rare, hard-to-find 18350 battery just to force us into buying an overpriced metal tube if we want to use standard 18650 cells... that’s just a textbook cash grab. Well, the party is over. Grab your 3D printer, a cold Monster, and let's disrupt their little business model for approximately 0.20€ worth of plastic.
This DIY adapter adds exactly 30mm to the flashlight body, making it fully compatible with the standard, cheap, and easily recyclable 18650 batteries that you can find literally everywhere (yes, even inside that broken tire inflator your neighbor threw away (my case)). Instead of dealing with micro-plastic threads that strip the first time you tighten them, this model uses a tight press-fit design that bites onto the original metal threads like a champion.
How to make it work (The Aluminum Can Hack): Since plastic doesn't conduct electricity (shocking, I know), you need to build the electrical bridge yourself. It takes 2 minutes: Drink your Monster. Wash the can. Cut a 6mm wide strip of metal from the can. CRUCIAL STEP: Take some sandpaper and scratch the living hell out of both ends of the strip. Cans have an invisible plastic coating inside and paint outside. Scrape it until you see raw, shiny metal, or your flashlight won't turn on. Slide the strip into the internal groove printed inside this tube. Fold the exposed ends outward over the flat edges where the tube meets the flashlight head and the tailcap. When you press everything back together, the aluminum parts will crush the strip, creating a perfect contact. Boom, let there be light!
⚠Features & Truths:
- Hat Clip Compatible: Yes, it still fits the cap/hat mounts perfectly. No compromises here.
- USB-C Charging: Yes, you can still plug it in and charge your 18650 batteries inside.
DO NOT GO SWIMMING WITH IT: Look, it’s 3D printed plastic pressed together. It’s porous and there are no rubber O-rings here. It handles dry EDC use like a boss, but if you're planning a romantic swim in the river, swap back to the original short aluminum tube. Don't drown your driver.
🖨 Print Settings for non-exploding parts:Walls/Perimeters: 4 or 5 (Give it some muscle, the internal springs push hard).Infill: 100% (Solid gold, or well, solid plastic).Layer Height: 0.12mm - 0.16mm for accurate tolerances.Enjoy your cheap, infinite energy flashlight.
Take that, corporate strategy!
🇪🇸
Seamos sinceros: ¿10 euros por una pieza de aluminio diminuta y hueca? ¿Que es esto, Wuben?
La Wuben E7 es una linterna pequeña y fantástica, pero venderla con una batería 18350 rara y difícil de encontrar —solo para obligarnos a comprar un tubo de metal carísimo si queremos usar celdas 18650 estándar— es un intento descarado de sacarnos el dinero. Bueno, la fiesta se acabó. Coge tu impresora 3D y un Monster frío, y vamos a alterar su pequeño modelo de negocio gastando apenas 0,20 € en plástico.
Este adaptador casero añade exactamente 30 mm al cuerpo de la linterna, haciéndola totalmente compatible con las baterías 18650 estándar, baratas y fáciles de reciclar que encuentras literalmente en cualquier sitio (sí, incluso dentro de ese inflador de neumáticos roto que tiró tu vecino; mi caso). En lugar de lidiar con roscas de plástico diminutas que se pasan de rosca a la primera, este modelo utiliza un diseño de ajuste a presión firme que se agarra a la rosca metálica original de maravilla.
Cómo hacerlo funcionar (El truco de la lata de aluminio): Como el plástico no conduce la electricidad (sorprendente, ¿verdad?), tienes que construir tú mismo el puente eléctrico. Se tarda 2 minutos: bébete el Monster. Lava la lata. Corta una tira de metal de 6 mm de ancho de la lata. PASO CRUCIAL: Coge papel de lija y lija a conciencia ambos extremos de la tira. Las latas tienen un revestimiento plástico invisible por dentro y pintura por fuera. Raspa hasta ver el metal brillante y desnudo; si no, la linterna no se encenderá. Desliza la tira en la ranura interna impresa dentro de este tubo. Dobla los extremos expuestos hacia afuera, sobre los bordes planos donde el tubo se une al cabezal de la linterna y a la tapa trasera. Al volver a montarlo todo, las piezas de aluminio aplastarán la tira, creando un contacto perfecto. ¡Bum, que se haga la luz!
⚠Características y realidades:
- Compatible con clip para gorra: Sí, sigue encajando perfectamente en los soportes para gorras. Sin compromisos en este aspecto.
- Carga USB-C: Sí, puedes seguir conectándola y cargando tus baterías 18650 en su interior. NO TE METAS A NADAR CON ELLA: Mira, se trata de piezas de plástico impreso en 3D ensambladas a presión. Es un material poroso y aquí no hay juntas tóricas de goma. Resiste perfectamente el uso diario (EDC) en seco, pero si planeas un baño romántico en el río, vuelve a colocar el tubo corto de aluminio original. No ahogues tu linterna.
🖨 Configuración de impresión para piezas que no exploten: Paredes/Perímetros: 4 o 5 (dale robustez, ya que los muelles internos ejercen mucha presión). Relleno: 100% (oro macizo, o bueno, plástico macizo). Altura de capa: 0,12 mm - 0,16 mm para lograr tolerancias precisas. Disfruta de tu linterna económica de energía infinita.
¡Toma eso, estrategia corporativa!
Post-Printing
Category: Hand Tools
