1 / 4
(8) Universal Dust Collection Adapters: Reducers & Straight Sleeves — zdjęcie 1
1 / 4

(8) Universal Dust Collection Adapters: Reducers & Straight Sleeves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A collection of dust collection reducers and sleeves designed to connect standard ABS pipes

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a set of reducers and joiner sleeves designed specifically for reliable press-fit connections on standard ABS shop piping, these models feature lead-in chamfers for quick alignment.

Whether you're adapting a large 4" main line down to a 2.5" hose, stepped sleeves, or simply coupling two straight runs together, these models are optimized for easy 3D printing without requiring supports.

Available Versions & Specs

4” to 2.5” Reducer

Designed to join a 4" ABS pipe on the inside and slip a 2.5" pipe over the outside. Integrated lead-in chamfers ensure an easy press fit.

  • Inner Diameters (ID): 4.500” & 2.125”

  • Outer Diameters (OD): 4.875” & 2.500”

  • Couple End Lengths: 1.500”

  • Total Length: 5.000”

  • Wall Thickness: 0.1875”

  • Transition Angle: 60° (smooth airflow, support-free printing)

2.25” to 2.5” Sleeve Reducer

Designed to step up or down, allowing a 2.5" ABS pipe over the outside and a 2.25" pipe on the inside. Features internal and external chamfers on the ends for smooth insertion.

  • Inner Diameter (ID): 2.250”

  • Outer Diameter (OD): 2.500”

  • Total Length: 1.500”

  • Wall Thickness: 0.125”

Straight Pipe Sleeves

Designed for joining two ABS pipes of equal diameter. Includes end chamfers for smooth insertion and an internal center stop ring to keep the joint perfectly centered.

  • Available Sizes: 2.0”, 2.5”, and 4.0”

  • Total Length: 2.500”

  • Wall Thickness: 0.1875”

[NEW] Straight Pipe Adapters

Designed for joining two ABS pipes of equal diameter—one pipe inside, one outside. Includes end chamfers for smooth insertion and flat stop for inner pipe insert so there's no gap to reduce the air flow.

  • Available Sizes: 2.0”, 2.5”, and 4.0”

  • Total Length: 

    • 2”: 3.5”

    • 2.5”: 3.375”

    • 4”: 3.5”

  • Wall Thickness: 

    • 2” & 2.5”: 0.1875”

    • 4”: 0.25”

Recommended Print Settings

  • Material: PETG, ABS, or ASA (Highly recommended for workshop durability, impact resistance. PLA can work, but it may creep under sustained pressure or warp near warm shop machinery).

  • Perimeters / Wall Loops: 4 to 6 walls (Crucial: Functional parts get their strength from perimeters, not high infill!)

  • Layer Height:  0.16mm-0.2mm (for smooth internal airflow and strong layer bonding)

  • Supports: None required

Custom Requests

Need a variant tailored to a specific pipe diameter or wall thickness? Leave a comment below with your exact measurements, and I’ll be happy to upload a custom-fit model for you!

Explore More Workshop Upgrades

Browse my full catalog of custom adapters, dust collection fittings, and workshop jigs here:

Tagi