1 / 3
Replacement Drive Sleeve / Clip Ring for Vintage Humming Top (Maya / Bolz / LENA) — zdjęcie 1
1 / 3

Replacement Drive Sleeve / Clip Ring for Vintage Humming Top (Maya / Bolz / LENA)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement drive guide ring for tin spinning tops (Maya, Bolz). Support-free print thanks to 45° chamfer. OpenSCAD code

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

English Description

Replacement Part for Tin Spinning Tops (Maya the Bee / Bolz / LENA)

The original plastic drive guide ring on traditional tin spinning tops (Brummkreisel) often degrades or snaps off over time. This model is a fully functional replacement sleeve that holds the internal spiral mechanism and snaps into the metal body.

Features:

  • Optimized for 3D Printing: Features a 45° chamfer under the retention clips so it prints cleanly without supports.

  • Fully Parametric: Designed in OpenSCAD with easily adjustable parameters for clip width, overhang, and wall thickness.

  • Curved Clips: Snap tabs follow the cylindrical body curve for a snug fit in the original sheet metal cutouts.

Print Settings:

  • Material: PETG or ABS/ASA (recommended for flexibility and friction resistance; avoid PLA as the clips may snap during insertion).

  • Orientation: Print upside down (flat bottom face on the print bed, clips pointing upward).

  • Layer Height: 0.2 mm

  • Perimeters: 3–4 walls for extra strength on the clips.

  • Supports: None required!

Deutsche Beschreibung (Optional als Ergänzung auf Printables)

Ersatz-Antriebshülse / Führungsring für Blech-Brummkreisel (Biene Maja / Bolz / LENA)

Der originale Kunststoff-Führungsring an klassischen Blechkreisel-Antrieben bricht nach einigen Jahren häufig ab. Dieses Ersatzteil ersetzt die Hülse, hält die gewendelte Drillstange und rastet in das Blechgehäuse ein.

Highlights:

  • Stützenfreier Druck: Die Rastnasen besitzen eine 45°-Anschrägung an der Unterseite, sodass das Bauteil ohne Support gedruckt werden kann.

  • Anpassbar: Erstellt mit OpenSCAD – Maße für Klipp-Höhe, -Breite und -Überstand lassen sich im Code anpassen.

Druckempfehlung:

  • Material: PETG, ABS oder ASA (PLA bricht beim Einrasten der Nasen leicht).

  • Ausrichtung: Auf dem Kopf stehend drucken (Flache Seite auf dem Druckbett).

  • Infill / Wände: Mind. 3–4 Wandlinien (Perimeter) für stabile Rastnasen.

Tagi