Replacement Drive Sleeve / Clip Ring for Vintage Humming Top (Maya / Bolz / LENA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement drive guide ring for tin spinning tops (Maya, Bolz). Support-free print thanks to 45° chamfer. OpenSCAD code
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
English Description
Replacement Part for Tin Spinning Tops (Maya the Bee / Bolz / LENA)
The original plastic drive guide ring on traditional tin spinning tops (Brummkreisel) often degrades or snaps off over time. This model is a fully functional replacement sleeve that holds the internal spiral mechanism and snaps into the metal body.
Features:
Optimized for 3D Printing: Features a 45° chamfer under the retention clips so it prints cleanly without supports.
Fully Parametric: Designed in OpenSCAD with easily adjustable parameters for clip width, overhang, and wall thickness.
Curved Clips: Snap tabs follow the cylindrical body curve for a snug fit in the original sheet metal cutouts.
Print Settings:
Material: PETG or ABS/ASA (recommended for flexibility and friction resistance; avoid PLA as the clips may snap during insertion).
Orientation: Print upside down (flat bottom face on the print bed, clips pointing upward).
Layer Height: 0.2 mm
Perimeters: 3–4 walls for extra strength on the clips.
Supports: None required!
Deutsche Beschreibung (Optional als Ergänzung auf Printables)
Ersatz-Antriebshülse / Führungsring für Blech-Brummkreisel (Biene Maja / Bolz / LENA)
Der originale Kunststoff-Führungsring an klassischen Blechkreisel-Antrieben bricht nach einigen Jahren häufig ab. Dieses Ersatzteil ersetzt die Hülse, hält die gewendelte Drillstange und rastet in das Blechgehäuse ein.
Highlights:
Stützenfreier Druck: Die Rastnasen besitzen eine 45°-Anschrägung an der Unterseite, sodass das Bauteil ohne Support gedruckt werden kann.
Anpassbar: Erstellt mit OpenSCAD – Maße für Klipp-Höhe, -Breite und -Überstand lassen sich im Code anpassen.
Druckempfehlung:
Material: PETG, ABS oder ASA (PLA bricht beim Einrasten der Nasen leicht).
Ausrichtung: Auf dem Kopf stehend drucken (Flache Seite auf dem Druckbett).
Infill / Wände: Mind. 3–4 Wandlinien (Perimeter) für stabile Rastnasen.