Multiboard Clothespin Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard clothespin remix with strong grip; uses a standard clothespin spring for assembly.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a practical remix of Jorge Marin’s original clothespin, redesigned to mount directly onto a Multiboard. I use it to hold a microfiber cloth while cleaning my 3D printer bed with isopropyl alcohol, but it’s useful for anything you want clipped and within reach.
Features
Fully compatible with Multiboard mounting holes
Strong grip for cloths, paper towels, gloves, notes, etc.
Compact and workshop‑friendly design
Easy assembly using a spring from a standard clothespin
Optional removable mounting when used with the SlideCleat connector by FLX Factory
Assembly Note You will need to reuse the spring from a regular clothespin to complete this print.
Removable Mounting If you want this clip to be removable from the Multiboard, I recommend using the SlideCleat connector by FLX Factory: https://www.printables.com/model/923921-slidecleat-connector-thread-for-multiboard
Print Settings
Material: PLA or PETG
Layer height: 0.2 mm
Supports required (see screenshot for recommended orientation)
15–25% infill
Credits This model is a remix of the original clothespin by Jorge Marin.