INDX External Purge Bin attachment and Angle Correction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows the extended bin to sit level on the side of the printer. You can add magnets to keep it from falling
- Ocena
- 4,5 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 557
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
This model is a remix of the wiper bin legs on the CORE One Indx and this much better model's angle. This design helps the wiper bin sit level and still be able to clip in and have magnets to attach to the bottom so it doesn't easily fall out. Honestly, Dominik Chuchlik's model for the external prime bucket for CORE One INDX is probably the better solution. Mine is just in case you already printed the bucket and want to have it be level and be able to attach magnets to it so it doesn't slide off. Since the clips attach to the outerpart of the bucket (the part facing out of the printer) I did have to use a bit of loctite to get it to not move back and forth. All in all, works.
Magnets are 10x4.5 mm and I also added a 10x3mm version. . If anyone needs another size let me know I can make variations.
Full disclosure: This was made with AI. I can't use open CAD to save my life.