Magnetic bottle transfer caps for PCO1881 threads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to install bottle transfer caps for use with bottles using PCO1881 (soda bottle) threads.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bottle transfer cap to help get the remnants of one bottle into another. (Print two!)
Printed in two pieces, press in 8x3mm magnets - be careful of magnet polarity! You want them to stick together, and in my testing, they stick together well enough that even a fairly full bottle is plenty stable when both are sitting on a flat surface. The easy way to ensure polarity is press in magnets on one side, then stick magnets to those, line up the other cap and press it together.
Easier than most one piece designs which require you to thread them on while the bottle is dumping out. This allows you to thread on both caps, then just flip the bottle and let the magnets hold it together.
I did get a little bit of leaking between them when testing with dish soap, but it wasn't bad and cleaned up easily.