1 / 2
Gauthier IBSOR No.3 Shutter Retaining Ring (M39x0.9)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retaining Ring for Gauthier IBSOR No.3 Shutter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
A 3D-printable retaining ring for Gauthier IBSOR No. 3 Shutter.
The thread specs is revers engineered from the only IBSOR shutter I own. Shutter manufactured during this period do not have consistent thread specs, so a little experimentation is needed.
Thread specs is M39x0.9, with a .40mm diametral adjustment for 3D printing tolerances.
Application Notes:
- Tested with PLA and PETG
- 0.15mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.