4x5 Linhof Technika Lens Board Organizer. (96x99mm, IKEA 365+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stackable organiser to safely store and transport your 4x5 Linhof lenses. Uses a lid from IKEA 365+ series.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a stackable container to safety store and transport you lenses mounted on 4x5 Linhof Technika Lens Boards. This design uses a widely available IKEA 365+ mix and match series, rectangular lid. IKEA Article Number: 405.779.43, designed by Sarah Fager.
https://www.ikea.com/us/en/p/ikea-365-lid-rectangular-plastic-40577943/
This design is based on the Graflex Lensboard Organizer I designed. As of now I do not own any camera that takes the Linhof Lens Board, but I have 2 knock-off boards on hand, so I designed the organizer based around their measurements.
I have not as of yet printed the full model as I do not have original Linhof boards to test them on. Which is why only photos from Graflex version is posted. However I have included a smaller cross section (See photo) of the Linhof Board Organizer so you can test your boards first before committing the filament on the complete model.
Please post a make or leave comments if this had worked for you, this is the only way I and others know this design is useful.
If you are looking to Remix using the IKEA lid, you can download the rim STEP format below.