Transport Cover for HackRF PortaPack H4M
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip-on friction-fit cover protecting the H4M PortaPack touchscreen and main button during transport. No supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
If you carry your HackRF + PortaPack H4M in a backpack or case, the touchscreen and the main rotary button are the first things to take a hit — and those two most vulnerable parts are exactly what this cover protects. It follows the exact outer contour of the H4M front panel, including the rounded corners. The 9.5 mm skirt wraps over the lid edge and holds by friction with 0.1 mm clearance per side. The internal cavity leaves a 3 mm gap above the front face, so the cover never touches the display or the button. Two semicircular notches in the middle of the long sides make removal easy.
Printing:
Front plate down on the bed, no supports
PLA or PETG
Clearance is tuned for a typical FDM printer