1 / 5
DIN Rail Mount for GLEDOPTO WLED Controller — zdjęcie 1
1 / 5

DIN Rail Mount for GLEDOPTO WLED Controller

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple DIN rail mount for GL-C-017WL-D (or similar) controller.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

I used this model to install a GLEDOPTO GL-C-017WL-D controller on a DIN rail.

Several GLEDOPTO controllers share the same housing and should be compatible (external dimensions are 108x45x18mm including the mounting tabs).

Print parameters

  • Nozzle diameter: 0,4mm

  • Layer height: 0,2mm

  • Infill: 20%

  • Wall count: 3

  • Recommended material: PETG

Assembly

In addition to the mounting bracket, you should print 2x Voron-style DIN rail clips

The following hardware is needed:

  • 4x M2x10mm self-tapping screws

  • 2x M3x4x5 brass inserts

  • 2x M3x6 SHCS (or BHCS) screws

Tagi