1 / 5
DIN Rail Mount for GLEDOPTO WLED Controller — image 1
1 / 5

DIN Rail Mount for GLEDOPTO WLED Controller

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple DIN rail mount for GL-C-017WL-D (or similar) controller.

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

I used this model to install a GLEDOPTO GL-C-017WL-D controller on a DIN rail.

Several GLEDOPTO controllers share the same housing and should be compatible (external dimensions are 108x45x18mm including the mounting tabs).

Print parameters

  • Nozzle diameter: 0,4mm

  • Layer height: 0,2mm

  • Infill: 20%

  • Wall count: 3

  • Recommended material: PETG

Assembly

In addition to the mounting bracket, you should print 2x Voron-style DIN rail clips

The following hardware is needed:

  • 4x M2x10mm self-tapping screws

  • 2x M3x4x5 brass inserts

  • 2x M3x6 SHCS (or BHCS) screws

Tags