1 / 2
Grejig System: Hammer Hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hammer hanger for the grejig wall mount system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 27 mm slot with a funnelled mouth. Wide handles drop in from above and the head stops them going through.
Clips onto an IKEA GREJIG wall grid with no screws, no glue and no extra
hardware — tilt it on and it snaps home.
Supports ON — tree (auto), 45 degrees. Print lying on its side. The clip's over-hook overhangs whatever else does, so this is not optional.
Compatible with IKEA GREJIG. Not affiliated with, endorsed by, or sponsored by
Inter IKEA Systems B.V.