1 / 2
The Bench-nought - Vessel of the Void - WH40K Imperium Benchy — zdjęcie 1
1 / 2

The Bench-nought - Vessel of the Void - WH40K Imperium Benchy

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bring the glory of the Emperor to your printer bed, the Imperial Benchy gives the iconic 3D test a grimdark upgrade.

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Imperial Benchy - 3D Print Benchmark

Bring the glory of the Imperium to your printer bed! The Imperial Benchy takes the iconic, universally loved 3D printing benchmark and gives it a subtle, grimdark upgrade. Featuring a double-barreled heavy stubber, a gold Aquila on the hull, a purity seal, and a skull-embossed ship's wheel, this model tests your printer's capabilities while honoring the Machine Spirit.

Purge stringing, banish layer shifts, and appease the Omnissiah with the ultimate calibration print.

Model Features

  • The Classic Hull: Preserves the essential overhangs, bridges, and curves of the original 3D Benchy to test your machine settings.

  • Minimal Grimdark Details: Raised Imperial Aquila, rear-facing heavy turret, purity seal on the cabin wall, and a custom helm.

  • No Text: A clean, sleek finish along the hull and stern for a smooth print look.

Recommended Print Settings

  • Layer Height: 0.12mm or 0.16mm (for maximum detail on the Aquila and turret)

  • Infill: 10% - 15% (Grid or Gyroid)

  • Supports: None required! Designed to print natively like the standard Benchy.

  • Rafts / Brim: Not needed unless your bed adhesion is poor.

  • Walls / Outer Perimeter: 2 - 3 loops

  • Material: PLA, PETG, or Metallic/Silk PLA for a pre-painted metallic look.

Praise the Omnissiah and happy printing!

Tagi