Garage Door Opener Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original button cover broke, since its 20+ years old. Rather than replacing both buttons with something more…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 330
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The original button cover broke, since its 20+ years old. Rather than replacing both buttons with something more modern, the old one works fine so I just measured, designed, and printed a new button cover.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: SUNLU PETG White
Notes:
A future note, might want to print with a more transparent filament to allow for the led to shine brighter. Also since I printed with the front side down, the outward face does need a bit of sanding from the support material.
Category: Replacement Parts