Lutron Claro Faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had the idea to mount a servo motor to the faceplate so I could use Alexa to control it to turn on the fan or lights…
- Ocena
- 4,5 / 5
- Polubienia
- 21
- Pobrania
- 107
- Wydruki
- 2
- Wyświetlenia
- 618
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I had the idea to mount a servo motor to the faceplate so I could use Alexa to control it to turn on the fan or lights in my room. This faceplate is the first step for my idea. I figure if anyone's faceplate snaps while removing theirs, they can use this file to print a new one. Version 2 will include the housing for the servo and control board.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2
Infill:
15%
Filament: GizmoDorks PLA Green Post-Printing =============
Finishing
This was just a test piece for me so I wouldn't do any post processing on it, but if anyone is going to use this as their final, I would recommend using wood filler with a little bit of water to fill any of the crevices on the print. Then use a sanding sponge at 100\120 grit, 200, 300, and finally 400 with wet sanding until it gets a polished look as the original.
Category: Replacement Parts