Carrom Striker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We lost our carrom striker at home, so I ended up making 2 new ones. I tried following the official rules/dimensions…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 670
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
We lost our carrom striker at home, so I ended up making 2 new ones. I tried following the official rules/dimensions as close as possible, so I had to use a metal composite filament to match the specified weight. Using a larger nozzle size and layer height seems to give the part additional strength. I did a little bit of post-processing to make sure there were no rough edges or surfaces. Even after playing a few matches for testing, I had 0 complaints. It glided smoothly across the board and it didn't show any signs of damage or chips.
"Carrom (also spelled carom/carroms) is a tabletop game of Indian origin. The game is very popular in South Asia and the Middle East, and is known by various names in different languages." "Striker pieces are used to push the carrom men and the queen across the board to the pockets." https://en.wikipedia.org/wiki/Carrom#Strikers
"The Striker shall be smooth and round with a diameter of not more than 4.13 cm and weighing not more than 15.00 gms." http://www.indiancarrom.co.in/laws-of-carrom/
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.32
Infill:
40%
Filament: Proto-pasta Steel-filled Metal Composite PLA Grey
Notes:
- 1.0mm Hardened Nozzle Ironing for Smooth top surface for less post-processing Random Z-Seam Alignment Nozzle: 230℃ Bed: 60℃ Print Orientation flat on bed
Post-Printing
Sanding/Polishing
For a smooth finish that will glide across the board better, I used the following grit sanding paper and sponges:
* 120/180 grit for preparing the surfaces * 220/320 grit for finishing the surface * 400/600 grit for polishing the surfaceI finished off by washing the piece with water and wiping it dry before using baby powder to help it glide better.
Category: Games