Liczymy pasujące modele…
A good indoor game activity which can be played during lock down situation while maintaining the social distance. Felt fabric can be added on a striker base by adhesive like hot glue gun to play smoothly.
A replica of the TIE/sk Striker from Rogue One. It has movable print-in-place wings. The scale is at 1:270 with a length of 63.6mm and a wingspan of 43mm. (The hinges are 2mm in diameter.) Holder uses a small base and slanted pin from…
Should fit Garmin striker 4 plus and cv plus. Attaches without adhesive and prints without support.
A fearsome owl that is always looking for the killing blow. A funny DND idea I had. Collect them all! Over 20 Owls available!! COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Tree Supports on build plate…
Naruto to Boruto
Mark 25 Striker Inspired Helmet V2 You guys liked my first one so much I felt it only right to update it. I started from my base mesh and reworked the hole thing. Enjoy Category: 3D Printing
A Cover for the Garmin Striker plus 4CV
Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…
Not much change to the already awesome original. I only sliced the main wing in half for a shorter more reliable print. Category: Vehicles
Mark 25 Striker Inspired Helmet Enjoy Category: 3D Printing
Like a number of you, I'm finding that the universal transducer mounting plate is not very universal for the Old Town Kayak. So I'm making my own custom mounting plate for my Garmin Striker transducer. I've got it so that the transducer…
If you've got a Ford truck with rattling doors, it's likely you need new door striker bushings but you can't buy them without the full bolt assembly - seems like overkill. Took no time to model and print this up and presto! No more…
The Stormproof Match Container with Striker and Screw Lid is designed for storing stormproof matches, sized for matches approximately 70mm in length. The container has a width of 34mm, an internal height of 75mm, and an external height of…
Vodotěsná krabička na zápalky s uloženým škrtátkem. Škrtací plocha se nalepí lepidlem (např. vteřinovým) na vnitřní plast, který se vloží do krabičky. Na obě strany lze umístit dvě škrtátka ze standardní krabičky zápalek, celkem 4…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
Summary This is a remix of another design. This will fit the Garmin Striker Plus 4CV. Could use some minor tweaking but does what its suppose to do. Print Settings Rafts: No Supports: No Resolution: .16 Infill:25 Filament brand: PLA or…
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
Can print from ABS or PETG. 2 variants included, 45º cutout, or no cutout. If no cutout you have to saw it to measure and give it some heat to push it into place.
This is a replacement base for the Garmin Striker. I couldn’t find one available online, so I designed and made my own to create an ice fishing setup using the same Striker unit I use on my boat. I mounted it to a case, allowing the…
We lost our carrom striker at home, so I ended up making 2 new ones. I tried following the official rules/dimensions as close as possible, so I had to use a metal composite filament to match the specified weight. Using a larger nozzle…
creditos ao original https://www.thingiverse.com/thing:2962608/comments
Funcional Airsoft grenade launcher parts for my replica of xm148. I chosen a different style of mechanism for this project. This gun using striker system thats not common for airsoft launchers. I dont know if it is a batter system or not…
This is a customizable air hockey striker/mallet/paddle. The ones that were already on this site weren't the right size or shape for my kids air hockey table. The default parameters are for my kids 4' by 2' air hockey table. You can…
This is a tool and accessory holder for the Shark StainStriker HairPro Portable Carpet Spot Cleaner (Model # PX251, but may be compatible with other variants). It holds the 3 different heads, plus the alternate mini brush. Printed on a…
This is a replacement door striker for a number of Frigidaire and other brand clothes washer doors. I accidentally broke the one on my washer, and modeled this one as a replacement. Category: Replacement Parts
Compatibility: -Sig Sauer P365 Optics Ready -Sig Sauer P365 Coyote Optics Ready -Most likely will fit most other P365, comment with confirmed working and will update list Quick easy print. Printed at 30% with PLA+. Resulted in a snug fit,…
Ever had a door that just won't stay closed because the latch doesn't engage the striker plate enough? Print this and fix the problem. This model is 4mm thick and can be adjusted easily in your slicer to fit your needs. The screw holes…
This is just a basic door striker. The hole is slightly larger and moved towards the edge, so the door doesn't have to close as far to latch. Just something I threw together because when I moved the standard striker out as far as it…
Small stand to mount a Garmin Striker fish finder onto a flat surface. I made this to mount my Striker 5 to a Wilderness Systems Flex Pod box lid. You only need the flexpod_mount_combined_v1.stl file to print. The rest are there for…
I needed a mount to for the fish finder i mounted it with 3 M5 screws and nuts the cad file is included and the values can be adjusted as they're simple parameters. I printed it in PLA but you should probably use ASA since it'll be…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. “At the middle of this…
This is a remix of an older file for a ford door striker bushing. This remix fits OBS ford trucks 93-97 F150, F250, F350. The original file is the correct length but the diameter of the inner part is too narrow for OBS trucks. I modified…
This adapter allows you to plug and play your Garmin Striker plus 4 transducer to the Lowrance Ready bay on your Hobie Kayak. I cut up pieces from Yakfisher's design here to adapt to the cheaper transducer than comes with the Striker plus…
Designed for those "oops I locked myself out" moments at home. The DoorPik helps you regain entry during home lockouts without damaging doors. Its 1.2mm tip slips between most residential door frames and striker plates. If you're unsure…
Replacement door striker for Kenmore Washing Machine. Part Number 1344566. Should be printed on its side for added strength. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 30…
Head of Jaeger Striker Eureka from Pacific Rim. I Printed on an Ender 3 S1, it took about 40h
Wanted a simple mount to mount my Garmin Striker 4 fish finer to my boat. Was not able to find anything that attached directly to the Striker 4, so I design this. Works well and holds the Striker 4 very securely. You need to print either…
Dome Match striker Fuzzy skin feature provides enough friction to light matches Must use “strike anywhere” matches, will not work with safety or “strike on box” matches No supports needed, 0.2 mm layer height, smaller variable layer…
Bmw E30 - trunk side cover latch striker. OEM-number: 51 47 1 947 370. For touring only. Reproduced with the dimensions of original part. Fits in place, and works fine! You can find the best way to place this model on the printing table…
This is a design I came up with to mount my Strike fish finder on an ABS or PVC rack I made for my float tube, The Striker mount is threaded and will screw on to a 1-1/2 ABS threaded drain fitting. The sensor mounts are designed to be…
Striker Melee From the latest battlepass . ''STRIKER MELEE VALORANT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. Category: 3D Printing
Todo: increase steel slot thickness as it’s too snug. add spring or bead to hold rod/steel in without too much resistance
In this design, the striker comes with a flat bottom with a groove around the edge. I cut a piece of felt just smaller than the diameter of the striker and then I used hot glue to stick the edges of the felt into the groove, while pulling…
I'm using small push solenoids as strikers for my pinball cabinet project: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/ The solenoids I purchased did not have mounting tabs so I designed these little strikers. The horizontal…
//* Nerf dart carrier uploaded, sorry I forget it Recently I bought a Tie Striker in a flea market without a wing. My son was so excited with it that I did a spare wing for replace the missing one. There is two versions: Ala.stl is the…
This model was designed to be used in Airsoft for the pyrotechnics that use the included striker. Quite often these strikers fail or fall off so this is a nice backup to have. You will need to buy the striker paper, cut it to size and…
Für einen Flipper benötigte ich eine Halterung zu den Heschen Spulen HS-0530B. Diese haben 12V 5N und 10mm Hub. Die Löcher zur Befestigung mit M3 sind hier exakt passend. Die Befestigungslöcher am Boden haben 3,5 mm Durchmesser. Die…
Needed the tool, I printed the tool. Print Settings Resolution: .18 or less Infill: All shells/perimeters Filament: eSun ABS Any Notes: I chose to do all perimeters instead of infill. Provides slightly more strength in the event you get a…
Remix of Match Striker - Dome Fuzzy skin feature provides enough friction to light matches Must use “strike anywhere” matches, will not work with safety or “strike on box” matches No supports needed, 0.2 mm layer height, smaller variable…
The best filament for printing is Nylon as original, but I guess filament like ASA/PC also works well. I printed in PETG to test the resistance (and because I don't have a stronger filament ^^), after several months there doesn't seem to…
when I was doing some annuall maintenance I found the striker plate to be broken, so I designed and printed a new one. Once fitted I made version 2 (which is this file). Version 2 contains: larger dimensions to cover potential paint…
I have no printing or assembly instructions for this. I haven't printed this version and it's mostly for figure customizers that want the full Storm Striker in different configurations. I can't guarantee it's ability to print. The three…
Striker heavy reconnaissance hovercraft is a great addition to your game. The model is compatible with the Warhammer 40K, using the body from the Gryphon model from Robogear as the cockpit More info about model here:…
Add a touch of magic to your collection with this adorable Cute Forest Spirit . Featuring a rounded body, oversized glossy eyes, tiny arms, and charming fantasy details, this character is designed to bring warmth and personality to any…
This design is intended exclusively for airsoft replicas and is not designed, tested, or intended for use on firearms. A functional suppressor designed for the Ares Amoeba Striker AS-03 airsoft rifle, with expected compatibility with the…
⚽ Panda Footballer: The Cute Striker – CARTOON EDITION (noAMS) Meet our stylized "chibi" panda football player, the ultimate star of the pitch! This figurine combines the charm of one of the world's most beloved animals with a modern,…
https://cults3d.com/en/3d-model/art/gtfo-striker-sovereignnations https://gtfo.fandom.com/wiki/Striker Strikers are one of the most easily recognizable enemies within the game. Their basic anatomy is similar to a masculine humanoid,…
Assembly requires spare magazine spring with follower, 4x 2cm long M3 screws and small spring for BB stopper (I used clicker pen spring). Sanding might be required to fit BB stopper freely.
Garmin Striker 4 plus Hobie Through Eye Wiring Hole Mount Simply undo the through hole wiring grommet, replace with this - feed the cables up thorugh the holes in the adapter, add some silicon or other sealant to keep the water out, and…
I needed a new striker sleeve on my 1991 Ford Bronco. Should be the same for 80-96 maybe 78 on up but I am not familiar with the 2nd gens. PETG probably the best option. I printed with a brim just to be sure it stuck.
This takes m4x8mm screws. I have the threads barely showing, as that's all the purchase you need. Flip the STL 180 degrees to avoid bridging, the 3mf seems to be in the right orientation.
Bring the power of a true Viking legend to your collection with The Viking Striker: Haaland. This premium 3D printable sculpture captures the explosive speed, determination, and fearless attitude inspired by one of football's most iconic…
Gladiator geartrack storage solution for Garmin striker 4 models. Will work with cv, plus, and all the other striker 4 flavors. prints with supports. I printed mine in ASA for hot summer garage temps. I recommend printing in in the…
To complete this Fishing Rig you will need: 8x M4x6mm heat-serts 8x M4x16mm bolts 2x M3x16mm bolts 2x M3 nuts The M3 hardware is for the two power wire wraps I used button heads but pretty much anything will work. You also need the…
This is a WIP. Will update it with full instructions and parts may not fit, will remove this once all checks have been done. This was made using the 1/144 Windam backpack reference, see link below. You can use the reference yourself to…
Keďže používate TPU a výplň 40% , uveďte to priamo do popisu alebo k inštrukciám pre tlač: Materiál: TPU (Flex) – je ideálny, pretože tlmí nárazy a je odolný voči opotrebeniu. Výplň (Infill): 40 % (Gyróid alebo Grid) – zabezpečí…
A simple front grip your Street Sweeper, with a rail section, so you can attach your accessory of choice. You will need a single M3 x 35mm socket head bolt. For the best mix of robustness and flexibility, I recommend you print it in PETG.…
SSC Tuatara Striker as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
They don't make a swivel top large enough for my Garmin Striker/EchoMap 9", I created a larger version of the Swivel Top. Mine allows it to be completely Parallel to the Base, unlike their design, which always has if off center. No Swivel…
In rounding out my fleets for starship combat in Ortus Novae, I decided I needed more variety in my starfighter squadrons. The Dominion Striker is a great model, so I reduced it in size and put it on a starship base. If you want to know…
Lou Super Striker - Brawl Stars Skin
front rail pour striker ares as 02
Adapter to use a different PCIe riser cable with the non-standard screw pattern in the Antec Striker case. Designed and tested with the LINKUP - AVA5 PCIE 5.0 Riser Cable but will likely work with others. Fusion file included for tweaking…
Play air hockey on your table!
When you get the dual extruder kit for the Makergear M2 you replace the X axis belt clamp. The stock design gives you a X home position which is about 5mm off the left side of the bed. I took the stock design and extended it by 6mm so X…
D ring style front sling mount for Ares Striker (as-01), standart handguard. my print was a tad loose, laid some tape in it to make it more snug. Due to the nature of 3D printing i cannnot guarantee that it will hold, so use at your own…
This is a model I hacked at in tinkercad to allow a Garmin Striker Plus 4 transducer to mount to the hull of my Hobie Pro Angler 14. The model allows for four 8x3mm N52 magnets to be glued in, allowing the transducer to stay securely in…
Simple wall mount mag holder for the Ares Striker Striker magazines. I got the AS-01 but all of the magazines should be identical for all the striker series. For Installation you need 2x M3x16 Countersunk Screws. (The aluminium support…
!!! Updated Print Settings available !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Empty Chamber Flag (EC-Flag) Features: Chambers and barrel get misaligned → no shooting possible.…
Game crash? CAD exploded? Boss emailed you “quick change”? Smack the Case Striker-a TPU punch ball that mounts to your Qube 540 and absorbs all your rage, so your computer doesn't have to. It's therapy but for people who don't want to…
Washing machine door latch part number WH10X10004, 131763302 or 131763310. Fits GE, Frigidaire and probably more.
adapter plate to mount a Garmin Striker 4 fish finder to an oar lock or anywhere you can bolt something with a 1/2 in (13 mm) hole. There are 2 peg files, one with a center bore to drive a screw into for additional strength and one…
This is an exact copy of the door striker on the microwave door. They can break easily and why replace the whole macine when you can print repair it instead.
Modified version of Shilskii's design. I really like the original, but I had trouble reproducing all of the fine details with a 0.4 mm nozzle. To improve printability, I made the sides of the lower body thicker and flatter . The knurling…
🌧 Waterproof Match & Strike Container (Remix) Based on the great model by JRH. A nice, reliable container to safely store matches and a strike face in a completely waterproof way. Sized up from JRH's original file to comfortably fit 96mm…
100% infill 3 wall loops PLA tested only.
Tired of just "pushing" the ball in Robo Soccer? Upgrade your game! Designed specifically for the 2026 Codeavour 7.0 - Track 3 competition, the "Advanced Striker Chassis" transforms your robot from a simple pusher into a strategic…
Replacement for original Lid Striker as mine has spring latch broken off. Use organic supports if possible, printed from PET-G, that should withstand the high temps in the summer.
Funcional Airsoft grenade launcher parts for my replica of xm148. I chosen a different style of mechanism for this project. This gun using striker system thats not common for airsoft launchers. I dont know if it is a batter system or not…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
!!! Updated Print Settings available !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Empty Chamber Flag (EC-Flag) Features: Chambers and barrel get misaligned → no shooting possible.…
Wanted a simple mount to mount my Garmin Striker 4 fish finer to my boat. Was not able to find anything that attached directly to the Striker 4, so I design this. Works well and holds the Striker 4 very securely. You need to print either…
Adapter to use a different PCIe riser cable with the non-standard screw pattern in the Antec Striker case. Designed and tested with the LINKUP - AVA5 PCIE 5.0 Riser Cable but will likely work with others. Fusion file included for tweaking…
To complete this Fishing Rig you will need: 8x M4x6mm heat-serts 8x M4x16mm bolts 2x M3x16mm bolts 2x M3 nuts The M3 hardware is for the two power wire wraps I used button heads but pretty much anything will work. You also need the…
This is a replacement base for the Garmin Striker. I couldn’t find one available online, so I designed and made my own to create an ice fishing setup using the same Striker unit I use on my boat. I mounted it to a case, allowing the…
The sliding door striker receiver on the Toyota Proace (2015, L2H2) is a plastic part that tends to crack over time, causing the sliding door to not latch properly. This is an exact replacement part that can be printed at home and…
