ASUS ROG Strix SCAR 16 2025 Lid Gap Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brief Introduction: Left and right mirrored screen gap supports designed for the ROG Strix SCAR 16-inch (2025 G635),
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Detailed Description:
The model is designed based on actual machine measurements
Printing orientation:
The leftmost side of the left piece faces the print bed
The rightmost side of the right piece faces the print bed
The left and right parts are not interchangeable
Recommended slicing parameters:
Material: PETG
nozzle: 0.4 mm
layer height: 0.2 mm
walls: 4
top/bottom layers: 5
infill: 30–40%
infill type: any
supports: off
Brim: not required
scale: 100%
Seam: place in a position that does not contact the laptop if possible
Outer wall speed: recommended not to exceed 60 mm/s
It is recommended to thoroughly dry PETG before printing
Safety Notice:
This model is designed based on manual measurements from a real machine. Variations in fit may occur due to different production batches, screen bezels, rubber feet, and printer dimensional errors.
Before first use, you must check:
the printed part has no warping
the B-surface and C-surface fit completely
both sides have consistent height
no part contacts the active display area
the stops do not press against the screen panel
the contact surfaces have no burrs or sharp points
I used AI to create multiple versions, and the description was also generated with AI's help. I performed a simple check, and after printing, I find it to be fine for my own use. Since I've needed this item for a long time due to its significant impact on heat dissipation, I believe others will need it too.