1 / 2
ASUS ROG Strix SCAR 16 2025 Lid Gap Supports — image 1
1 / 2

ASUS ROG Strix SCAR 16 2025 Lid Gap Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Brief Introduction: Left and right mirrored screen gap supports designed for the ROG Strix SCAR 16-inch (2025 G635),

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
29
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Detailed Description:

 

 

The model is designed based on actual machine measurements

Printing orientation:

  • The leftmost side of the left piece faces the print bed

  • The rightmost side of the right piece faces the print bed

  • The left and right parts are not interchangeable

Recommended slicing parameters:

  • Material: PETG

  • nozzle: 0.4 mm

  • layer height: 0.2 mm

  • walls: 4

  • top/bottom layers: 5

  • infill: 30–40%

  • infill type: any

  • supports: off

  • Brim: not required

  • scale: 100%

  • Seam: place in a position that does not contact the laptop if possible

  • Outer wall speed: recommended not to exceed 60 mm/s

  • It is recommended to thoroughly dry PETG before printing

 

Safety Notice:

This model is designed based on manual measurements from a real machine. Variations in fit may occur due to different production batches, screen bezels, rubber feet, and printer dimensional errors.

Before first use, you must check:

  • the printed part has no warping

  • the B-surface and C-surface fit completely

  • both sides have consistent height

  • no part contacts the active display area

  • the stops do not press against the screen panel

  • the contact surfaces have no burrs or sharp points

 

I used AI to create multiple versions, and the description was also generated with AI's help. I performed a simple check, and after printing, I find it to be fine for my own use. Since I've needed this item for a long time due to its significant impact on heat dissipation, I believe others will need it too.

Tags